Series 1 The Series 1 tractors are designed and engineered to prove that one machine can cover all the needs of your property. While minimizing your manual effort, these tractors eliminate the need for multiple machines and tools to overcome challenges. Use the front loader to transport material around your property, the mid-mount mower to tend to your lawn and a backhoe implement with rear attachments to complete cleaning tasks efficiently. |
Perform the tasks of a full-size tractor, while enjoying the maneuverability of a riding mower. The T224 is the essential TYM Series 1 tractor, serving as an indispensable groundskeeper for every property owner. |
All the right features to get the job done Complete a range of jobs with a TYM Series 1 tractor. Achieve results faster with a powerful high-torque engine, control implements easily with a PTO switch, and stay energized with an ergonomically designed operator station. |
Ergonomic features for enhanced productivity A wide operator cabin with a flat floor offers good visibility and ample leg room, promoting comfortable operation. All controls are within arms’ reach, including a dial to control the cutting height of the mid-mount implement. The accelerator, brake pedal, differential lock and parking brake are easily accessible on the floor of the cabin, located precisely where you expect them to be. These features make this tractor easy to operate, even for novice drivers. |
Accessible fuel tank for simpler refueling Located on the right side of the driver’s seat, the fuel tank of this tractor is easy to open with an ergonomically designed twist off cap. The tank can be topped up with fuel, even when implements are connected to the tractor. |
Foldable ROPS for storage in low-ceiling structures The Roll Over Protective Structure (ROPS) of the tractor is designed to be folded, allowing for easy storage in low-ceiling garages or sheds. |
Controls to speed up, slow down, raise or lower implements Even while the tractor is in motion, a dedicated PTO lever can be used to speed up or slow down implement rpm, while the dial can raise and lower implements at the prescribed speed. |
Hydrostatic transmission for infinitely variable drive speed Responsive hydrostatic controls offers a smooth ride for operators, from the forward and reverse pedal to the powered steering wheel. These controls reduce the need for operator effort during a range of tasks, particularly while operating the optional front-end loader. |
High torque, water-cooled Yanmar diesel engine The Japanese made Yanmar engine offers more torque with less revs compared to competitors in its class. Since it is water cooled, the engine warms up faster and stabilized temperature more effectively while the tractor is running. The engine is also Tier 4 certified, including for noise emission standards. |
Mid-mount linkage for mowing implements The mid-mount linkage on the tractor allows easy installation for a mower up to 54 inches wide. Cutting height can be adjusted easily during operation using the dial on the operator console, so patches of overgrowth can be tackled more efficiently. |
Easy to open hood for convenient maintenance The tractor hood can be opened in one motion, providing easy access to the engine and other systems for daily checks, routine service and maintenance. The side panel can also be removed easily without the need for specialized tools. |
Engine manufacturer | Yanmar 3TNV74F |
---|---|
Type | Natural Aspiration |
Gross engine power | 21.5 hp | 16 kW |
PTO power | 15.1 hp | 11.3 kW |
Rated engine speed | 3200 rpm |
No. of cylinders | 3 |
Displacement | 60.6 cu. in. |
Air cleaner | Single Dry |
Alternator | 12V, 40A |
Fuel system | IDI |
Transmission type | HST |
---|---|
No. of speeds | 2 Range |
Max. traveling speed | 8.4 mph |
Brakes | Wet Disc |
Steering | Hydrostatic |
Clutch | N/A |
Pump type | Single Gear Pump |
---|---|
Implement flow | 4.17 gpm |
Steering flow | 2.11 gpm |
Total flow | 6.28 gpm |
Category, 3-point hitch | I (N) |
Hitch lift capacity | 1100 lb |
Hitch lift capacity at 24 inches behind link ends | 679 lb |
Lift control type | Position |
No. of standard remote valves | Optional (1) |
PTO type | Independent |
---|---|
PTO control | Electric/Hydro |
PTO rear | 540 rpm |
Fuel tank | 6.6 U.S. gal. |
---|---|
Coolant | 3.7 qt |
Crankcase | 1.9 qt |
Transmission/Hydraulics system | 3.6 U.S. gal |
Front axle | 2.6 qt |
Overall length with 3-point hitch | 94.2 in. |
---|---|
Overall width | 44.5 in. |
Wheelbase | 53.1 in. |
Height to top of ROPS | 86.6 in. |
Min. ground clearance | 8.3 in. |
Min. turn radius without brakes | 86.6 in. |
Weight with ROPS | 1472 lb |
R3 Turf - Front | Turf Master 16x7.50-8 NHS TL 4PR |
---|---|
R3 Turf - Rear | Turf Master 24x12.00-12 NHS TL 4PR |
R4 Industrial - Front | WT300 18x8.5-10 NHS TL 4PR |
R4 Lg Industrial - Rear | WT300 26x12.00-12 NHS TL 4PR |
Name | Link |
T224 | Download |