Series 2 The Series 2 tractors are built to take on more demanding tasks while maintaining the smallest frame possible, tackling routine jobs, and the occasional tougher challenges, in and around your property. Use the front loader to transport material around your property and use the rear hitch for tow-behind implements to complete tasks like cleaning efficiently |
Compact enough to give you the versatility you need, and powerful enough to take on the tougher jobs on and off the field. |
All the right features to get the job done Complete a range of jobs with a TYM Series 2 tractor. Achieve results faster with a powerful high-torque engine, control implements easily with a PTO switch, and stay energized with an ergonomically designed operator station. |
Eco-friendly TYM Tier-IV engine Equipped with a naturally aspirated engine designed and manufactured by TYM, the tractor is designed to be eco-friendly and fuel-efficient but makes no compromise on performance and reliability. |
LED work light (Optional) Full front & rear LED work lights facilitate safer operations, particularly in low visibility conditions such as rainy or dusty work environments. |
Tilt steering wheel The tilt steering wheel allows operators to adjust the position of the steering wheel for a more comfortable driving experience. |
Enhanced implement controls for efficient operation Equipped with a range of controls and two sets of rear remote valves to increase productivity and work speed. Control implement lowering speed and depth with the implement lowering speed dial and draft control levers. |
Cruise control (HST) The cruise control function allows you to maintain RPM at your preferred setting, regardless of the tractor’s load conditions. |
Water-separating fuel filter The water-separating fuel filter prevents foreign substances from entering the fuel, ensuring better engine start ability and preventing damage to the machine. |
4215CH | |
Engine manufacturer | TYM A2300N2 IDI |
Type | Natural Aspiration |
Gross engine power | 42 hp | 31.3 kW |
PTO power | 36 hp | 26.8 kW |
Rated engine speed | 2600 rpm |
No. of cylinders | 4 |
Displacement | 139.5 cu. in. |
Air cleaner | Dry Element |
Alternator | 12V, 70A |
Fuel system | IDI |
Transmission type | HST |
No. of speeds | 3-Range |
Max. traveling speed | 18.8 mph |
Brakes | Wet, Multi-disc |
Steering | Hydrostatic |
Clutch | No |
Pump type | Single Gear Pump |
Implement flow | 4.4 gpm |
Steering flow | 9.9 gpm |
Total flow | 14.3 gpm |
Category, 3-point hitch | I |
Hitch lift capacity | 3306 lb |
Hitch lift capacity at 24 inches behind link ends | 2425 lb |
Lift control type | Position |
No. of standard remote valves | Optional (up to 4) |
PTO type | Independent |
PTO control | Wet, Multi-disc |
PTO rear | 560 rpm |
Fuel tank | 7.1 gal |
Coolant | 6.2 qt |
Crankcase | 4.8 qt |
Transmission/Hydraulics system | 9.8 gal |
Front axle | 1.7 qt |
Overall length with 3-point hitch | 120.9 in. |
Overall width | 55.6 in. |
Wheelbase | 65.7 in. |
Height to top of ROPS | 89.3 in. |
Min. ground clearance | 13.1 in. |
Min. turn radius with brakes | 7.5 in |
Min. turn radius without brakes | 104.7 in. |
Weight with ROPS | 3664 lb |
R1 Agricultural - Front | 7-16 |
R1 Agricultural - Rear | 11.2-24 |
R4 Industrial - Front | 28x8.5-14 |
R4 Industrial - Rear | 15-19.5 |